Wednesday, September 5, 2012

Are You "Drive" Enough?

What is Drive M7 Energy Drink?


DRIVE Energy Drink is brought to you by M7 Japan Research and Development, a company that's always in the fast lane. M7 Japan is known to make some of the best performance parts in the automotive market and DRIVE is no different, just like the precision engineered products M7 Japan makes, DRIVE is scientifically engineered and tested to provide the same power and performance that our customers have come to expect from M7.
What DRIVE's you? That's the question we asked some of the best racers in the world and we took their DRIVE and created the ultimate formulation which resulted in a drink that gives you the ultimate adrenaline rush. Not only does it give you an extra energy boost to help you get through your day, our ingredients are proven to help you focus and stay alert. Take it from our team of racers, whose daily job is to drive fast, just ask them what DRIVE's them!
Take a DRIVE wherever you're going or whatever you're doing. Whether you're a taking a fast lap around the track or looking for that last minute energy boost for your drive home, let us give you that DRIVE!!!


Credit to:


follow me on twitter @kelabprotonsaga
facebook: M7 Klang



Tuesday, September 4, 2012

DriveM7

Hi All!!

Good news to all kelabprotonsaga visitors and readers. This is what we called the new era of DriveM7. More information will be coming soon. We'll keep you update.

credit to:

DriveM7












follow me on twitter @kelabprotonsaga
Facebook : M7 Klang

Monday, August 27, 2012

How to adjust tappets?



How To Adjust Tappets

1. Jack the front right wheel up, using a trolley jack. 
2. Open the bonnet and remove the airbox, using a 
philips screwdriver. 
3. Remove the rocker cover, using a 10mm socket. 
4. Turn the wheel until 1/2 or 3/4 or 5/6 or 7/8 are “Rocking” and the rockers are both at the same height. This is where the left one is closing (up) and the right one is opening (down). 
5. Adjust the correct tappets shown below, using a 11mm socket and a feeler gauge. 
6. Put the engine back together and start the car. 




What does “Rocking” mean? 



“Rocking” is a term used when the rockers open and close 
the valves. 



 

Theory 

If 1/2 is “Rocking” adjust 7/8 
If 3/4 is “Rocking” adjust 5/6 
If 5/6 is “Rocking” adjust 3/4 
If 7/8 is “Rocking” adjust 1/2 

Correct Gap (mm) 

1 = Exhaust 0.3mm 
2 = Inlet 0.2mm 
3 = Exhaust 0.3mm 
4 = Inlet 0.2mm 
5 = Inlet 0.2mm 
6 = Exhaust 0.3mm 
7 = Inlet 0.2mm 
8 = Exhaust 0.3mm 

Please check that the units are correct and for the correct rockers. 


Note: Disclaimer; Do it at your own risks. We are not responsible at any damage of your car :)

Sources: fiesta turbo
tappet adjustment

Thursday, August 23, 2012

Selamat Hari Raya

Salam sejahtera & Salam 1 Malaysia...


Kebelakangan ni gua betul2 busy kurang update. Ada banyak meterial, tp berkesempatan nk kongsi info sama lu org. InsyaAllah lps raya ni blh tenang dan byk masa utk kongsi dgn lu org. 

Bg yg nk balik kampung tu, tolong periksa kenderaan lu org. Cek minyak hitam atau blh service sendiri kalau masa suntuk. Periksa keadaan tayar dan tekanan angin pada tayar. Jangan lupa jugak check alignment. 

Elakkan dari berlaku kecelakaan di hari perayaan. Untuk yg ada family, kena kesian kat anak bini lu org klu keta rosak tersadai tepi jalan yg berpunca dr lu sendiri tak periksa kereta. Akhir sekali kalau tau nk jalan jauh tu rajin2 la sembahyang musafir. 


Untuk kesempatan ni gua nk ucapkan Selamat Hari Raya Aidilfitri. Maaf Zahir dan Batin. 



Tuesday, July 31, 2012

Monday, July 23, 2012

Salam Ramadhan...

Selamat menyambut bulan Ramadhan Al-Mubarak. Semoga Ramadhan tahun ni membawa lebih keberkatan serta di penuhi dengan amalan yang berfaedah.

contohi lah seperti askar ni. walau terpaksa berjaga ditengah panas masih lagi mampu bertadarus

Thursday, July 12, 2012

Requested by twitter follower...

Salam 1Malaysia..

- Gua nk ucapkan terima kasih kepada follower2 twitter gua @kelabprotonsaga
- Terima kasih jugak kepada selebriti2 yang sudi follow @kelabprotonsaga bagi meramaikan.
- Ada sorang follower request untuk gua promote blog cookies dia..since gua rasa bula puasa dah dekat, apa kata lu orang try usha blog dia untuk survey2. mana tau ada yang berkenan. boleh try usha blog dia kat sini..:


Http://kedaimamanur.blogspot.com


Http://kedaimamanur.blogspot.com


Http://kedaimamanur.blogspot.com


Please support her at http://kedaimamanur.blogspot.com? tq all...



p/s: Sebagai tukang promote, gua dpt cookies raya free..muahahaha..tq

Sunday, July 8, 2012

Old driveshaft was changed!

Slm...

  Tak lama dlu gua pernah bikin entry psl driveshaft. Blh tgk sini . Mase gua bikin top overhaul haritu, gua ada sembang² dengan pomen yg driveshaft gua mmg payah nk cari klu problem. Tak lama pastu betul² problem! Gua bernasib baik sebab driveshaft gua yg dh hampir pupus ni ada kedai jual&mmg tinggal last stock. Probably klu ada masalah atau kong, mmg gua terpaksa berhijrah ke kedai lain untuk beli...


          
Driveshaft Lama
Moral: Klu spe² yg blh tahan sabar blh guna lg orion, tp klu mau pakai saga jugak, blh cari magma atau megavalve. Mungkin kurang pening pala. 

Wednesday, June 20, 2012

What is top overhaul?


Top overhaul means that worn out compression rings and oil rings will be replaced with new set of rings for the engine to run in full compression ratio. This means also that valve seat must be set properly same with rocker arms and camshaft. It is done by removing the oil pan and from under remove the connecting rod bolt and push each piston assembly together with the connecting rod upward. After a thorough inspection of each parts replace all the parts that shows wear specially connecting rod bearings set again to standard size. After some machine shop works on the cylinder head everything can be retrofitted again to the engine block. And after setting all the necessary timing you can now start the engine to see if your work will turn out fine.




So this is done on my engine. 


After assembled


After removing oil pan

After disassemble from engine


Cleaning the head manually using fine sand paper
Cleaning the head






crankshaft before

crankshaft after cleaning



Signs You May Need a Rebuild

There are some frequently seen signs that a rebuild may be necessary for your engine. The most common sign is oil consumption and excessive white smoke in the exhaust, especially when the engine is cold. This is normally a sign of worn piston rings. More extreme signs could be metal shavings in the engine oil (a common sign of dangerously worn bearings) and "knocking" or "chattering" from the engine bearings.

Installing crankshaft


valves before cleaning..full of carbons

adjusting tappets

cleaning with acids
p/s: I didn't need to replace piston rings since its still usable. 

Sources: wiki, russles and howto

Monday, May 28, 2012

What is Cooling Coil?

Function of an evaporator

- Cooling coil or an evaporator is a device used to cool air. It is part of a cooling system found in freezers, refrigerators and air conditioners. Evaporators are responsible for the cool air that comes out of the vents. The evaporator's cooling mechanism uses heat to do the job. Failure of the evaporator can lead to problems with the entire cooling system and damage some of your furnishings if the problem isn't contained.



Facts :

- The evaporator coils are used to transform the refrigerant from a liquid to a gas. It is the last device in the cooling system. To accomplish this, the evaporator allows the fluid refrigerant to expand with lower pressure in the coils. As the liquid expands, it loses heat. A fan blows warmer air over the coils and that air become chilly and flows out the vents.






Benefits :

- The evaporator is responsible for the air that cools your house, car and business and flows through our refrigerators and freezers. Evaporators are the last link in the cooling system chain, and its location is usually on the inside while the other parts are on the outside. That makes it much simpler to reach if problems arise. Many problems with an evaporator are easy to dissect and fix due to the simplicity of the device.


Functions :

- Evaporators use the heat around it to produce the cool air coming out of the vents. When the refrigerant, a fluid used throughout many cooling systems, leaves from the compressor, it goes through a tiny hole as a liquid. The low pressure of the evaporator allows the refrigerant to expand and cool down, becoming a gas. As this is happening, a fan is blowing warmer air from around the cooling system over the coils filled with the cooler gas. The gas catches the heat molecules, creating condensation on the coils. As the air blows over the coils and through the vents, the air becomes much cooler. The gas in the evaporator coils continues to the front of the cooling system and repeats the process until the set temperature is reached.

Significance :


- The evaporator is just as important as the other parts of the cooling system. Although the last link in a cooling system, it is just as important as the other parts. Usually if there are any problems with the temperature of the air, it can usually be traced back to the evaporator. Leaks from the coils not caught by the flow pan can damage furnishings such as carpets, curtains, furniture and ceiling tiles if the cooling system is high enough. If the pressure or the temperature affect the ability of the liquid's transformation, the remaining fluid can damage other parts of the cooling system that is expecting gas to arrive.


Warning :

One of the common problems with an evaporator is the coils freezing over. This happens when the temperature in the evaporator falls to 32 degrees or lower. Several causes of this is restricted air flow, indoor temperature being too low, an undersized liquid line and an oversized compressor. This stops the condensation from the air flowing over the coils from leaking into a pan. The condensation freezes on the coils, and the more condensation that builds up, the more ice will form. Another problem is with a perfectly working evaporator. If there is a foul smell, it could signal a fungus is growing in the coils. This problem comes from the moisture remaining in the coils for a period of time. A car's AC is most prone to these complaints. Cleaners such as Lysol will get rid of the fungus.

Taken from my own car

Cooling coil leaking

This price list is for reference only...

Proton


Proton Saga: RM135.00 / RM310.00 Original
Proton Iswara: RM135.00 / RM310.00 Original
Proton Wira: RM135.00 / RM310.00 Original
Proton Satria: RM135.00 / RM280.00 Original
Proton Perdana: RM140.00 / RM280.00 Original
Proton Waja: RM145.00 / RM300.00 Original
Proton Gen2: RM350.00 Original
Proton Juara: RM350.00 Original




* Price may differ from time to time depends on dealer




Sources:

ehow
howstuffwork
2carspro

Saturday, May 26, 2012

Berhati-hati la k...

Lokasi Kejadian : Putrajaya Sentral

Baru² ni ada sorang pengguna twitter yang pakai kereta saga kena pecah. Ada barang² yang dirembatnye. Zaman skarang ni penyangak bukan target kenderaan baru untuk "buat kerja", tapi kereta lama pun dia blh sapu. Dari gambar² yang mangsa kirimkan kpd gua mmg gua yakin yang pencuri ni memang pakai kenderaan jenis yang sama. Malas nak beli punye pasal, rembat orang punye barang.




Mana ada orang rembat menatang ni melainkan keta dia punye dah ilang tu x?

Pemegang pun kena rembat

Cermin pandang belakang kena rembat

Pelindung depan ni pun kena rembat

So kepada pengguna² kereta kat luar sana, tak kira la lu pakai kereta baru atau lama ke perlu pentingkan ciri² keselamatan. Elakkan kereta anda jadi mangsa kepada penyangak yang nak kerja mudah. Tips??

1- Elakkan kereta lu orang diletakkan dikawasan² terpencil/terlindung atau kurang dari orang ramai.
2- Pasang tinted / Pelindung matahari
3- Pasang alarm
4- Perhati keadaan sekeliling sebelum parking kenderaan
5- Elakkan menyimpan barang² berharga didalam kereta.
6- Gunakan kunci tambahan untuk steering

Memey betul orang kata "malang tak berbau", tapi kalau kita boleh cuba elakkan. Jangan ingat kereta lama orang tak minat nak rembat.

p/s: Jom hebohkan Hari Belia 2012 di Putrajaya!!

Friday, May 25, 2012

Tolong la perlahankan kenderaan...

Mula2 gua nak mintak maaf sbb lama tak update. Sibuk sket..Gua nak pesan pada pemandu2 yg ada kat Malaysia ni. Tlg perlahankan kenderaan lu orang bila jumpa bonggol. Sebab apa? Kebanyakan kita mungkin akan perlahankan kenderaan, tapi yang dibelakang kita belum tentu.


Ada la pemandu yang bangang fikir keta dia besar main laju kalau jumpa bonggol. Kalau depan lu takde keta, mungkin lu blh belasah bwk laju sbb yg jahanam pun keta lu! tapi mcmna kalau depan lu ada kereta&lu tak sempat break?? Ni la jadi pd keta gua. So pd pemandu2 kat luar sana. Tolong perlahankan kereta lu orang kalau jumpa bonggol. Selain dari elakkan absorber&spring lu cpt jahanam, untuk keselamatan pemandu lain juga. Chow!





p/s: keta dah siap. Tapi x sempat snap sbb bz. 

Jom meriahkan Hari Belia 2012 di Putrajaya! Sape geng2 saga blh mai dtg jugak. Nampak keta gua kasi tegur2 la. Click kat situ untuk tgk web hari belia. 




LinkWithin

Related Posts with Thumbnails